Short FinalDOCS
Airport Editor & plugins

Editor reference

Every tab and field in the Airport Editor, with the limits for each.

General

FieldLimitsNotes
Airport nameUp to 60 charactersShown on the menu and at the top during a shift.
Code3–4 letters or numbersShown on the map and menu.
ICAO 1.114 capital letters, optionalIf it's a real airport's code (like EGPH), players can choose Live weather and get its real wind and pressure.
DescriptionUp to 120 charactersThe one-liner on the airport's card.
Airspace size20–45 nm radiusBigger means longer flights in and out.
Exit altitude5,000–14,000 ftDepartures must reach this to be handed off.
Transition altitude 1.113,000–18,000 ftAbove it, levels are flight levels; arrivals get the QNH when they descend through it. Default 6,000 ft.
DifficultyBeginner, Intermediate, Hard, Expert, InsaneShown on the menu.
ApronWithin 20 nm of the fieldAutomatic, or drag the APRON square to place it.

Runways

One to six runways. At least one must take landings and one departures (they can be the same one).

FieldLimitsNotes
Heading0–359°Type it, use the slider, or drag an end on the map. The runway names follow (heading 240 → 06/24).
Length550–6,400 mAbout 0.3–3.5 nm. Most airliner runways are 2,500–4,000 m.
Parallel letterNone, L, C, RFor parallel runways: 09L/27R, 09R/27L.
Used forLand + depart, Landings only, Departures only, ClosedClosed runways are drawn but never used.
Has an ILS 1.11Per endWithout one, that end needs a visual or circling approach.
Missed approach to 1.11Per end: a non-exit fix, or AutomaticWhere go-arounds fly. Automatic picks a fix ahead of the runway, turning the outside way for L/R runways. A red dotted line shows it on the map.
Missed approach altitude 1.111,500–8,000 ftDefault 3,000 ft.
Bearing / distanceExact position of the runway's middle.

Fixes

Up to 80 fixes, each with a unique name of 2–8 capital letters or numbers.

TypeRules
Entry pointMust sit near the edge (within 4 nm of the boundary), and must feed into a holding fix. At least one is needed.
Holding / feeder fixArrivals fly here from their entry point and hold. Also used for missed approaches.
ExitWhere departures leave. At least one is needed.

Renaming a fix updates everything that uses it. Deleting one clears any entry point or missed approach that used it.

Zones 1.11

FieldLimits
NameUp to 8 characters, like R708 or D702
Size0.5–15 nm radius
Top1,000–20,000 ft. Aircraft above it are fine

Up to 20 zones. An aircraft inside one below its top costs the player 120.

Traffic

FieldLimitsNotes
ArrivalsOne every ~40–300 sShorter is busier. Traffic also builds through a shift, and each shift varies.
DeparturesOne every ~40–300 s
AirlinesStandard European mix, or your ownYour own: a weight from 0 to 100 per airline (0 = never). All on / All off buttons. At least one must be above 0.

Scenery

ItemLimitsNotes
TownsUp to 60, names up to 40 charactersLabels only.
Airfields 1.11Names up to 40 charactersNeighbouring airfields, drawn as a circle and slash. Scenery only.
Water 1.11 drawingUp to 40 shapes, 3–200 points eachLakes, sea and coastlines. Scenery only.
Rivers 1.11Up to 40, 2–200 points eachScenery only.
HillsUp to 40, 1–15 nm acrossSet safe altitudes: below one, players get a low-altitude alert and penalty. Safe altitude (0–16,000 ft) is automatic unless you set it: hills near a final approach get 2,500 ft so the approach stays flyable; others get 3,000–4,500 ft depending on size.

Check

Lists everything stopping the airport from saving, with a reminder of what a working airport needs:

  • at least one runway for landings and one for departures;
  • entry points near the edge, each feeding into a holding fix;
  • at least one exit fix for departures;
  • an ILS on at least one end of every landing runway;
  • at least one airline, if you've chosen your own mix.

It also lists every editor shortcut.

Short Final documentation. Something wrong or missing? Tell us in the Discord.