Short FinalDOCS
Airport Editor & plugins

Build an airport, step by step

From a blank layout to a playable, shareable airport in about fifteen minutes.

We'll build a coastal airport with two parallel runways, three ways in, a danger area offshore and some hills inland.

1. Start

  1. Main menu → Airport editor → Parallel runways.
  2. On the General tab, set the Airport name (“Saltmarsh International”) and a 3–4 letter Code (“SMI”). Add a one-line Description; it shows on the menu.
  3. Press Ctrl S now and again as you go.

2. Runways

  1. Open the Runways tab and click the first runway (or click it on the map).
  2. Set the Heading to 240 and the length to 3,200 m. The names update themselves (06L/24R).
  3. Do the same for the second runway, keeping it parallel.
  4. Used for: leave one as Landings only and the other as Departures only. That's how Heathrow and CDG work.
  5. Under Landing on…, both ends have Has an ILS ticked. Untick one if you want that end to be visual-only (players will need a visual or circling approach).
Tip

Point the runways into your airport's usual wind. Runways are chosen by the wind during a shift, so both ends get used.

3. Fixes: the way in and the way out

An airport needs three kinds of fix:

  • Entry points on the edge, where arrivals appear.
  • Holding fixes inside, where arrivals hold. Each entry point feeds into one.
  • Exit fixes where departures leave.
  1. Press F and click near the edge to the north-west. It's an entry point. Give it a name (2–8 capital letters, like GANET).
  2. Press F again and click about halfway in towards the runway: a holding fix (WHELK). Select the entry point and set Feeds into to WHELK. A dashed blue line joins them on the map.
  3. Repeat for two more directions. Three ways in is plenty for a medium airport.
  4. Add two or three exits on the edge, set to Exit. Spread them out so departures don't all head the same way.
  5. Use Snap to the airspace edge on an entry point to put it exactly on the boundary.
Good to know

Arrivals fly a named STAR from each entry point to its holding fix and descend into the stack there on their own. Departures fly a SID to their exit. You don't draw these: they're made from your fixes. Keep holding fixes 10–15 nm from the field, and away from the final approach.

4. Make it interesting

  1. A danger area. Press Z, click offshore. On the Zones tab, name it (D201), set the size (4 nm) and top (6,000 ft). Aircraft below the top inside it cost the player points.
  2. Hills. Press H and click a few places inland. Bigger hills get higher safe altitudes. Hills close to the final approach are automatically kept flyable (MSA 2,500 ft). Set your own Safe altitude if you want.
  3. The coast. Press W and click your way along the coastline, then back round off the map, and click the first point to close it. Reshape it later by dragging its points.
  4. A river (I), a few towns (T) and a neighbouring airfield (A) make it feel real.

5. Traffic

On the Traffic tab, set how often arrivals and departures come (one every ~40–300 seconds; Heathrow is about 80/90, Harrowfield 150/175). Untick Use the standard European mix to pick your own airlines and how often each appears (0 = never).

6. Check, test, share

  1. Open the Check tab. It lists anything that would stop the airport working: a missing exit, an entry point that feeds nowhere, a landing runway with no ILS on either end.
  2. Press ▶ Test fly. Play ten minutes. Are the holding fixes in sensible places? Do departures cross the arrivals? Is it too busy?
  3. Back in the editor, adjust, and test again.
  4. When you're happy, Export .sfplugin to send it to friends, or share it in Plugins → Community.
Short Final documentation. Something wrong or missing? Tell us in the Discord.